EV Charger Installation Essendon - Home & Business

Charge faster, safer, smarter with a local team you can call today.

Lightyear Electrical and Solar installs and commissions EV chargers in Essendon, Essendon North, Essendon West and Essendon Fields for homes, apartments, and businesses. We’re licensed A-Grade electricians and CEC-accredited, so your charger is safe, compliant and optimised to work with solar and off-peak tariffs.

Call now for a same-day assessment: 0422 080 766

Why Essendon Drivers Choose Lightyear

Local & responsive - regular work near Windy Hill, Essendon Station, Mt Alexander Rd, Keilor Rd, Napier Park, DFO Essendon, so site visits are quick.
Safety first - compliant with AS/NZS standards, correct RCD/RCBO selection, right cable size/derating, tidy and permanent installs.
Solar expertise - configure solar-only / solar-priority charging, export limiting and dynamic load control.
Repair-first electricians - if the board needs work, we upgrade/clean up during install (no two-tradie runaround).
Clear quoting - fixed-scope, written quote before any work starts.

All EVs & major brands - Tesla Wall Connector, myenergi Zappi, Wallbox, Ocular, EO, EVSE, Schneider, ABB and more.

What We Install (and Why It Matters)

Single-Phase 7.4 kW (Tethered or Socketed)

Ideal for most homes. Adds roughly 35–50 km/hour (vehicle-dependent). Perfect for overnight top-ups and daytime solar charging.

Three-Phase 11 kW / 22 kW

For properties with 3-phase supply or where faster turnaround is needed. We enable load balancing to protect your main fuse.

Smart Chargers (App-Controlled)

Schedule off-peak, set current limits, view kWh per session, and lock the unit. Many models support OCPP, Wi-Fi/Ethernet, and load management.

Solar-Aware Chargers

Options like Zappi track your PV export so charging prioritises green energy and reduces grid draw.

Cable & Connector Types

Australia uses Type 2 (Mennekes) for AC. Your EV will typically use Type 2 at home and CCS2 for DC fast charging. We match the charger to your car: Tesla, BYD, MG, Hyundai, Kia, Nissan, Polestar, Volvo, BMW, Mercedes-Benz, VW, and more.

Our EV Charger Installation Process (Essendon)

1) On-Site Assessment & Load Check

We inspect your switchboard, main supply capacity, cable route and parking layout. A maximum demand check ensures your charger won’t overload the home.

2) Design & Quoting

You get a clear plan: charger model, location, cable path, RCD type, any switchboard works, and optional 3-phase or solar integration. Fixed-scope quote. No surprises.

3) Installation & Compliance

Dedicated circuit with the correct breaker/RCD (many chargers require 6 mA DC detection; we match the protection device).
Cable selection sized for distance and derating; neat wall or pedestal mount.
Weatherproofing and signage where required.
Labelling and documentation to Australian requirements.

4) Commissioning, App Setup & Handover

We connect to Wi-Fi, set current limits and load management, enable solar tracking (if supported), and show you how to schedule/view sessions.

5) After-Care

We’re local. Need to relocate the unit, add a second charger, or integrate with a battery later? We plan ahead so your system is future-ready.

Solar + EV: Smarter (and Cheaper) Charging

rERED EV Car and Charger and solar pannels

Solar-only/priority modes maximise self-consumption.
Export limiting & dynamic load control keep your main supply protected while the house runs.
Pair with time-of-use tariffs: schedule overnight top-ups and daytime solar charging.
Add a battery later to push costs even lower.

We set it up so charging adapts automatically—no daily app tinkering.

Switchboard & Three-Phase Upgrades (If Needed)

Some Essendon homes need a board tidy or safety upgrade before EVSE. We handle:

Correct RCD/RCBO protection and EV circuit labelling
Neat DIN-rail layout, cable management, enclosure fixes
Three-phase upgrades (subject to distributor approval)
Surge protection (recommended)

You’ll have a board that’s safer and ready for future loads (induction cooktop, heat-pump HW, more EVs).

Home, Business & Strata Solutions

Homes

Single garage, carport, or driveway pedestal. Concealed cabling where practical, smart scheduling, solar integration.

Businesses & Fleets

Multiple chargers with load sharing, RFID access, OCPP back-end (usage reports, billing).

Apartments/Strata

We liaise with OC/strata, propose metered or sub-metered solutions, and configure load management so te building’s main supply stays protected.

Local Knowledge - Where We Work in Essendon

Windy Hill & Napier Park — heritage homes; careful external cable routes
Essendon Station / Rose St village — tight runs, off-street parking solutions
Mt Alexander Rd corridor — townhouse garages, ceiling runs and load sharing
Keilor Rd precinct — family homes moving to 3-phase + EV
Essendon Fields / DFO — commercial installs, signage and access control
Maribyrnong River edges / Aberfeldie — moisture-aware outdoor mounting and IP ratings

Nearby coverage: Moonee Ponds, Strathmore, Niddrie, Airport West, Ascot Vale, Aberfeldie, Pascoe Vale.

Recent Essendon Installs (Proof & Experience)

Case 1 - 7.4 kW Smart Charger, Essendon North

Single-phase charging for a Hyundai IONIQ 5. Installed Zappi with solar-only mode, concealed roof-space cabling. Owner now charges almost entirely on daytime PV.

Case 2 - 22 kW Three-Phase, Keilor Rd Area

Detached garage serving Kia EV6 and BYD Atto 3. Upgraded to three-phase, enabled load balancing, added off-peak schedules. Two EVs share capacity safely.

Case 3 - Strata Basement near Essendon Station

Wallbox units on dedicated EV circuits with OCPP back-end and RFID access. Load management protects the main board; residents receive fair, metered billing.

Safety & Compliance (Non-Negotiable)

We install to Australian electrical standards and manufacturer requirements. That includes correct:

Circuit protection (MCB/RCD matched to DC-leakage spec)
Cable sizing/derating and installation method
Earthing and fault protection
Isolation & labelling for EV circuits
Weatherproofing (IP-rated enclosures/outlets where required)

Every job finishes with testing, documentation and a clean handover.

Brands & Models We Install:

Tesla Wall Connector (Gen 3), myenergi Zappi, Wallbox Pulsar/Commander, EO Mini/Basic, Ocular LTE/Commercial, Schneider EVlink, ABB Terra AC, and more.
Already bought a charger? We’ll verify compatibility, install safely, or recommend a better fit.

What It’s Like Day-to-Day: